Home » Computer Network » What Is Network Congestion? Prevention Techniques

What Is Network Congestion? Prevention Techniques

Last updated:

Support this post with a reaction:

3,621 views

Computer networks allow multiple devices to communicate and exchange information through shared communication channels. Every time a user browses a website, watches an online video, downloads a file, or sends an email, data travels across the network in the form of packets. These packets pass through different network devices, such as routers and switches, before reaching their destinations.

However, network devices have limited processing capacity, memory, and bandwidth. When too many packets enter a network at the same time, the network may not be able to process or forward all of them efficiently. As a result, packets begin to wait in queues, transmission delays increase, and some packets may be lost. This situation is known as network congestion.

Network congestion is a common problem in computer networks, especially when several users access the same network resources simultaneously. To avoid this problem, different congestion prevention techniques are used. These techniques help manage network traffic, control the number of packets entering the network, and ensure efficient data transmission.

This article explains what congestion is, its causes and effects, and the important techniques used to prevent congestion in computer networks.

What Is Congestion in Computer Networks?

Congestion in computer networks is a condition that occurs when the amount of data traffic entering a network becomes greater than the network’s available capacity to process and transmit it. In this situation, routers and other network devices become overloaded because they receive more packets than they can handle efficiently.

When congestion occurs, packets accumulate in the buffers of routers. These packets must wait until the router becomes available to process and forward them. If the number of incoming packets continues to increase, the available buffer space may become full. When this happens, newly arriving packets may be dropped.

Network congestion can result in several problems, including increased transmission delays, packet loss, reduced throughput, and poor network performance.

For example, consider a situation where many users are connected to the same Wi-Fi network and simultaneously stream high-quality videos, download large files, and attend online meetings. If the available network bandwidth is insufficient to handle all these activities, the network may become congested.

Therefore, congestion prevention is important for maintaining smooth communication and improving the overall performance of a computer network.

How Does Network Congestion Occur?

Network congestion occurs when network traffic exceeds the available resources of communication devices and network links.

Every router has a limited amount of memory called a buffer. The buffer temporarily stores incoming packets before forwarding them to the next destination.

When packets arrive at a router faster than they can be transmitted, they are placed in a queue. If the router continues receiving packets at a high rate, the queue becomes longer.

When the buffer reaches its maximum capacity, the router cannot store additional packets. Consequently, newly arriving packets may be discarded.

The following steps explain how network congestion occurs:

  1. Multiple Devices Send Data: Several devices transmit data packets through the same network at the same time.
  2. Increased Network Traffic: The number of incoming packets increases, placing additional pressure on routers and communication links.
  3. Buffer Queue Formation: Routers temporarily store packets in their buffers when they cannot forward them immediately.
  4. Buffer Overloading: If packets continue arriving faster than they are processed, the buffer becomes full.
  5. Packet Loss: When no buffer space is available, additional packets are dropped.
  6. Increased Transmission Delay: Lost packets may need to be retransmitted, which creates additional network traffic and can make congestion worse.

Thus, network congestion develops when the demand for network resources becomes greater than the available capacity.

Causes of Network Congestion

Several factors can contribute to network congestion. The most common causes are explained below.

1. Excessive Network Traffic

When a large number of users access the same network simultaneously, the amount of transmitted data increases. If the network cannot handle this traffic, congestion may occur.

For example, many people watching online videos or downloading files through the same network can increase network traffic significantly.

2. Limited Bandwidth

Bandwidth refers to the maximum amount of data that a communication channel can carry during a given period.

When the available bandwidth is insufficient for the amount of data being transmitted, packets may experience delays. This can lead to network congestion.

3. Slow Network Devices

Routers and switches have limited processing capabilities. If these devices cannot process incoming packets quickly enough, packets accumulate in their buffers.

This can increase waiting time and reduce network performance.

4. Buffer Overflow

Buffers temporarily store packets before they are forwarded. When too many packets arrive, the buffer may become full.

Once the buffer reaches its capacity, additional packets are discarded, resulting in packet loss.

5. Poor Network Configuration

Incorrect routing decisions, inefficient network settings, and improper bandwidth allocation can cause certain network paths to become overloaded.

When traffic is not distributed properly, some communication links may experience congestion even when other links have available capacity.

6. Burst Traffic

Burst traffic occurs when a large number of packets are transmitted within a short period.

Even if the average network traffic is within the available capacity, sudden increases in data transmission can overload routers and cause temporary congestion.

Effects of Network Congestion

Network congestion affects the speed, reliability, and efficiency of data communication. Some important effects are discussed below.

1. Increased Network Delay

When too many packets wait in router buffers, they take longer to reach their destinations. This increases the overall communication delay.

2. Packet Loss

When router buffers become full, newly arriving packets may be discarded. This is called packet loss.

The lost packets may need to be transmitted again, increasing network traffic.

3. Reduced Throughput

Throughput refers to the actual amount of data successfully delivered through a network in a given period.

During congestion, packet loss and retransmissions can reduce the amount of useful data delivered to the destination.

4. Poor Network Performance

Congestion makes network communication slower and less efficient. Users may experience slow website loading, interrupted downloads, and buffering during video streaming.

5. Increased Retransmissions

When packets are lost or acknowledgments are not received within the expected time, the sender may retransmit the packets.

Repeated retransmissions generate additional traffic and can increase congestion further.

6. Unreliable Communication

Applications that require continuous and timely communication, such as video conferencing, online gaming, and voice calls, may experience interruptions and poor quality during congestion.

What Is Congestion Prevention?

Congestion prevention refers to the methods used to avoid network overload before serious congestion occurs.

The main purpose of congestion prevention is to manage the amount of traffic entering the network and ensure that available network resources are used efficiently.

These methods help prevent routers from becoming overloaded, reduce unnecessary packet transmissions, and maintain a stable flow of data.

In computer networks, congestion prevention is generally associated with open-loop congestion control techniques. These techniques attempt to prevent congestion without depending on continuous feedback about the current congestion condition.

The following techniques are commonly used to prevent congestion.

Techniques Used to Prevent Congestion

There are several techniques used to prevent congestion in computer networks. Each technique focuses on managing a different aspect of data transmission.

The major techniques are:

  1. Retransmission Policy
  2. Window Policy
  3. Acknowledgment Policy
  4. Discarding Policy
  5. Admission Policy
  6. Traffic Shaping
  7. Resource Reservation

1. Retransmission Policy

Retransmission policy is a congestion prevention technique that focuses on reducing unnecessary retransmissions of data packets.

In a computer network, packets may sometimes be lost or delayed during transmission. When the sender does not receive an acknowledgment within the expected time, it may retransmit the packet.

However, if retransmission is performed too frequently, it creates additional network traffic. This extra traffic can increase the load on routers and communication links, leading to congestion.

A proper retransmission policy helps avoid unnecessary retransmissions by selecting suitable timeout values and retransmission intervals.

It uses the following methods:

  • Proper Timeout Selection: The sender should select an appropriate timeout period based on the expected network delay. If the timeout is too short, packets may be retransmitted unnecessarily.
  • Adaptive Retransmission: The timeout value can be adjusted according to changing network conditions. This helps the sender avoid retransmitting packets too early.
  • Exponential Backoff: When repeated retransmissions fail, the sender can increase the waiting time before attempting another transmission. This prevents excessive traffic during network problems.

Example:

Suppose a sender transmits a packet to a receiver. If the acknowledgment is delayed because of temporary network congestion, the sender may incorrectly assume that the packet is lost.

If the sender retransmits the packet immediately, it creates unnecessary additional traffic. A proper retransmission policy helps reduce such situations.

Therefore, an effective retransmission policy minimizes unnecessary packet transmissions and helps prevent congestion.

2. Window Policy

Window policy is a congestion prevention technique that controls the number of packets or frames that can be transmitted before receiving acknowledgments.

In a sliding window protocol, the sender is allowed to transmit multiple packets without waiting for an acknowledgment after every packet.

However, if the sender transmits too many packets at once, the receiver and intermediate network devices may become overloaded.

A suitable window size helps regulate the amount of outstanding data in the network.

The following approaches are used:

  • Limiting the Window Size: A smaller window size limits the number of unacknowledged packets that can be transmitted at a time.
  • Proper Window Management: The sender should maintain an appropriate window size according to the network’s available resources.
  • Efficient Data Transmission: By controlling the number of packets sent at once, unnecessary network overload can be reduced.

Example:

Suppose a sender is allowed to transmit 10 packets before receiving acknowledgments. If the network has limited capacity, transmitting all 10 packets at once may increase the load.

By reducing the window size to 5 packets, the sender can limit the number of outstanding packets and reduce the possibility of network overload.

Therefore, window policy helps control data transmission and prevents excessive traffic from entering the network.

3. Acknowledgment Policy

Acknowledgment policy determines how and when the receiver sends acknowledgment messages to the sender after receiving data packets.

Acknowledgments are important because they inform the sender that the transmitted packets have been successfully received.

However, sending an acknowledgment for every individual packet creates additional network traffic. When a large number of packets are transmitted, acknowledgment messages can increase the overall network load.

An efficient acknowledgment policy reduces unnecessary acknowledgment traffic.

Some methods used in this policy include:

  • Delayed Acknowledgment: Instead of sending an acknowledgment immediately for every packet, the receiver waits briefly and acknowledges multiple packets together when appropriate.
  • Cumulative Acknowledgment: The receiver sends one acknowledgment that confirms the successful receipt of multiple consecutive packets.
  • Piggybacking: In two-way communication, an acknowledgment can be attached to an outgoing data packet instead of sending a separate acknowledgment packet.

Example:

Suppose a receiver receives five data packets from a sender.

Instead of sending five separate acknowledgment messages, the receiver may use cumulative acknowledgment to confirm the successful receipt of all five packets.

This reduces the number of acknowledgment packets transmitted through the network.

Therefore, an efficient acknowledgment policy reduces control traffic and helps prevent unnecessary network load.

4. Discarding Policy

Discarding policy is a congestion prevention technique in which network devices selectively discard packets when they cannot process or forward all incoming traffic efficiently.

When routers become overloaded, their buffer space may become limited. If every packet is stored without considering its importance, the buffer may fill quickly.

A discarding policy helps manage this situation by deciding which packets should be discarded.

For example, a router may discard packets that are less important or belong to applications that can tolerate some packet loss.

The main approaches include:

  • Selective Packet Discarding: Less important packets can be discarded first to preserve resources for more important traffic.
  • Priority-Based Discarding: Packets with lower priority may be dropped before packets carrying important information.
  • Early Packet Discarding: Some network mechanisms discard packets before buffers become completely full to prevent severe congestion.

Example:

Consider a network router that receives video streaming packets, voice communication packets, and other data packets.

If the router becomes overloaded, it may prioritize delay-sensitive traffic and discard selected lower-priority packets to manage the available buffer space.

Thus, discarding policy helps manage limited buffer resources and reduces the possibility of complete buffer overload.

5. Admission Policy

Admission policy is a congestion prevention technique that controls whether a new connection or traffic flow should be allowed to enter the network.

Before accepting a new connection, the network checks whether sufficient resources are available to support it.

These resources may include bandwidth, buffer space, and processing capacity.

If the network has enough resources, the new connection is accepted. Otherwise, the connection may be rejected or delayed until resources become available.

Admission control is especially useful in networks that provide Quality of Service (QoS), where applications require specific performance guarantees.

Example:

Suppose a network supports multiple video conferencing connections. Each connection requires a certain amount of bandwidth to maintain good communication quality.

If the network has sufficient bandwidth, it can accept another video conferencing connection.

However, if the available bandwidth is already being used, the network may reject the new connection rather than overload the existing network resources.

Therefore, admission policy prevents excessive traffic from entering the network and helps maintain reliable communication.

6. Traffic Shaping

Traffic shaping is a congestion prevention technique used to control the rate at which data packets enter a network.

It prevents sudden increases in network traffic by regulating packet transmission according to predefined limits.

Traffic shaping makes data transmission smoother and helps avoid sudden traffic bursts that can overload routers and communication links.

Two commonly used traffic shaping algorithms are explained below.

A. Leaky Bucket Algorithm

The Leaky Bucket Algorithm is a traffic shaping technique that controls the rate of outgoing packets.

It works like a bucket with a small hole at the bottom. Incoming packets are placed inside the bucket, and packets leave at a fixed rate.

If packets arrive faster than they can leave, they are stored temporarily in the bucket. If the bucket becomes full, additional packets are discarded.

Working of the Leaky Bucket Algorithm:

  1. Incoming packets are placed into a buffer called a bucket.
  2. Packets are transmitted from the bucket at a fixed rate.
  3. If packets arrive faster than the transmission rate, they wait in the buffer.
  4. If the buffer becomes full, additional packets are discarded.
  5. This process helps maintain a steady flow of outgoing traffic.

Example:

Suppose packets arrive at a rate of 100 packets per second, but the network is configured to transmit only 50 packets per second.

The remaining packets wait in the bucket until they can be transmitted. If the bucket becomes full, extra packets are discarded.

This prevents sudden bursts of traffic from entering the network.

B. Token Bucket Algorithm

The Token Bucket Algorithm is another traffic shaping technique used to control network traffic.

In this algorithm, tokens are generated and added to a bucket at a fixed rate. A packet can be transmitted only when the required number of tokens is available.

Tokens represent permission to transmit data.

Unlike the Leaky Bucket Algorithm, the Token Bucket Algorithm allows temporary bursts of traffic when enough tokens have accumulated.

Working of the Token Bucket Algorithm:

  1. Tokens are generated at a fixed rate and added to the bucket.
  2. The bucket stores the generated tokens up to its maximum capacity.
  3. Before transmitting a packet, the sender checks whether sufficient tokens are available.
  4. If enough tokens are available, the packet is transmitted and the required tokens are removed.
  5. If tokens are unavailable, the packet must wait until new tokens are generated.

Example:

Suppose a network generates 10 tokens per second and allows a maximum of 50 tokens in the bucket.

If the bucket contains enough tokens, the sender can transmit a group of packets quickly. Once the tokens are used, the sender must wait for new tokens.

This method controls the average transmission rate while allowing occasional bursts of data.

7. Resource Reservation

Resource reservation is a technique used to allocate network resources in advance for specific connections or applications.

Before a connection starts transmitting data, the network reserves the required resources, such as bandwidth and buffer space.

This helps ensure that the network has enough capacity to handle the expected traffic.

If sufficient resources are not available, the network may refuse the reservation or delay the connection.

Resource reservation is particularly useful for applications that require continuous and predictable data transmission.

Example:

Consider a video conferencing application that requires a certain amount of bandwidth to maintain smooth audio and video communication.

Before establishing the connection, the network may reserve the required bandwidth. This reduces the possibility of network overload caused by uncontrolled resource usage.

Therefore, resource reservation helps distribute network resources efficiently and supports reliable communication.

Difference Between Congestion Prevention and Congestion Control

Congestion prevention and congestion control are related concepts, but they focus on different stages of network congestion management.

Congestion prevention attempts to avoid congestion before it occurs, whereas congestion control includes methods used to detect, manage, and reduce congestion when network traffic becomes excessive.

BasisCongestion PreventionCongestion Control
MeaningPrevents congestion before it develops.Manages congestion when it occurs or is detected.
ApproachMainly preventive.Preventive and reactive, depending on the mechanism.
Main purposeAvoid network overload.Reduce congestion and maintain network performance.
TechniquesRetransmission, window, acknowledgment, discarding, and admission policies.Techniques such as traffic-rate reduction, congestion feedback, and active queue management.
Network conditionFocuses on avoiding excessive traffic.Focuses on responding to changing network conditions.

Advantages of Congestion Prevention

Congestion prevention provides several benefits to computer networks. Some important advantages are explained below.

  1. Improved Network Performance: It helps maintain efficient data transmission by preventing excessive traffic from entering the network.
  2. Reduced Packet Loss: By managing network traffic and buffer usage, congestion prevention reduces the chances of packet loss.
  3. Lower Transmission Delay: Proper traffic management reduces packet waiting time in router buffers.
  4. Efficient Bandwidth Utilization: It helps distribute available bandwidth among different users and applications.
  5. Improved Network Reliability: Preventing overload helps maintain stable communication between network devices.
  6. Reduced Retransmission: Efficient retransmission and acknowledgment policies minimize unnecessary packet transmissions.
  7. Better Quality of Service: Applications such as video conferencing, voice calls, and online streaming can receive more consistent network performance.

Real-Life Examples of Network Congestion

Network congestion can occur in several everyday situations.

1. Online Video Streaming: When many users stream high-resolution videos through the same network, available bandwidth may become insufficient, resulting in buffering.

2. Online Gaming: During network congestion, gaming packets may experience delays, causing high latency and interruptions.

3. Video Conferencing: Applications such as online meetings require continuous data transmission. Congestion can cause audio interruptions and poor video quality.

4. File Downloads: When multiple users download large files simultaneously, the network may become overloaded and download speeds may decrease.

5. Public Wi-Fi Networks: Airports, railway stations, shopping malls, and other public places often have many users connected to the same network. Heavy usage can result in congestion.